This webinar will present process modeling to optimize lagoon-based treatment systems to meet more stringent BOD, TSS, and ammonia limits. The modeling software is widely used in the wastewater community to investigate the impact of various changes in loadings and temperatures and to thoroughly verify process design and performance especially with regards to BOD, TSS, and nutrient removal. This webinar will provide data and specific case studies demonstrating the predicted performance vs. actual data, using the calibrated model.
1 (one) Wastewater CPE
Printable Flier
PRE-REGISTRATION IS REQUIRED
Instructor:
Mark Razor, Lemna Environmental
Host:
Betty Green, VRWA Workforce Specialist
Time:
Thursday,October 15, 2020
10:00am—11:00am
Cost:
$10 - VRWA Members
$20 - Non-Members
Webinar Link will be emailed to you after registration is complete.